Use a 12mm hex socket wrench to unscrew the pan bolt. Avoid the hot exhaust pipe by using an extender. Take care not to loss the screw washer.
Oil filter removed with a chain wrench. More residual oil drained out.
Cheap chain wrench.
Oil the rubber seal before replace it back.
Remove the 2 8mm screws holding the clutch filter plate. Take care of the spring.
Identify the outside of the clutch filter. Oil the rubber seal of the inner side .
Old and new clutch filter.
Clutch filter plate. Check the rubber seal.
DCT oil change needs approx 4L 10W-40 engine oil. Check the dipstick level when the bike is in central stand.
Recommended oil replacement volume is 3.4L. Dipstick should be just seat on the socket without screwing in , when doing measuremnt .
