2015年2月27日 星期五
Lowering the power of a 55W HID ballast
›
Many biker found their 55W HID Xenon installtion is pretty attractive because of its brightness. But after a year or so, the overdriven HID ...
2015年2月3日 星期二
Mitsuba FR33-025 flasher relay LED mod
›
Finally succeed to hack this relay. The circuit has 2 protection circuit for the controller IC MC33193: 1) pin 7 sense the shunt and see...
1 則留言:
2014年2月20日 星期四
LED Flash Relay Modification
›
Just found a link http://www.600rr.net/vb/showthread.php?t=294551 , written by kritip This applies to EU and other bikes with hazards and...
2013年12月31日 星期二
Oil, oil filter and clutch filter change
›
Use a 12mm hex socket wrench to unscrew the pan bolt. Avoid the hot exhaust pipe by using an extender. Take care not to loss the screw w...
2013年5月5日 星期日
NC700 Givi Crash Bar Installation
›
Left Crash Bar : Remove the 17mm bolt.U need a lot of muscle power or any extension bar. Then the second engine 17mm bolt ...
Why Casio Protrek water proof fails
›
These are the tiny O-rings in the side buttons. These are the O-rings on the chasis. They are subject to dirt built up. Once the O-ring...
Replacing Handlebar
›
Loosen the 4 bolts , hex size 12mm Remove the brake lever light switch in front of the right brake reservoir Right side b...
›
首頁
查看網路版